For later identification, please enter a meaningful own name for the product (e.g. "Brand name black neck label").
Possible dimensions at this type:
The red area without borders or end folds define the width and height to be entered below. For all centre folded labels it is the visible surface of the opened/unfolded label without end folds or sew-in borders.
Please enter the dimensions of the red area shown above.
Please select material and quality
Satin is a material that consists of thin threads that still allow a good resolution. It can be ordered either with matt or shining surface. Thanks to its threads that are a little bit thicker than taffeta, satin labels are slighly thicker and their touch is a little softer.
This combination is recommended for the following label types:
- labels of any size
- in good quality
- without too filigree details
- without large graphical details or letterings that,
in spite of their largeness, should appear with
absolutely sharp contours and without gaps
Taffeta is the most resistent material and has a slightly shining ("satined") surface. Thanks to our finest Italian yarn that gas extremely thin threads, it allows a weaving resolution that is twice as high as satin.
This combination is the most chosen and may be used for all label types, but it is particularly recommended for labels
- smaller than 50 x 25 mm
- of high quality
- with small and filigree details
Taffeta is the most resistent material and has a slightly shining ("satined") surface. The ultra HD resolution is realized on special looms of that only a few ones exist worldwide. The weaving in ultra HD with our finest Italian yarn is the most dense and precious possible weaving resolution. The surface of labels woven in ultra HD is soft and smooth and offers a noble impression.
This combination may be used for all label types but it is particularly recommended for labels
- bigger than 50 x 25 mm
- of the highest possible quality
- with graphical details or letterings that are pin sharp
- with large graphical details or letterings that, in spite
of their largeness, should appear with absolutely
sharp contours and without any gaps
for sew on
Patches of this type have a glue-closed backing and laser/hot cut edges that avoid frazzling.
This patch type has an additional fleece backing that makes it thicker and more robust. All edges are laser/hot cut and do not frazzle.
This is the most robust and elaborate patch type. It has an additional fleece backing that makes it thicker and more solid. The edges are vertically overlock stitched.
Patches of this type have a thermal glue backing and can be applied with an iron or a hot press. The thermal glue is very solid and resists at many washings (uo to 60° C). All borders are of course laser/hot cut and cannot frazzle.
As normal stickers, these woven patches have a self-adhesive backing that is covered by a pull-off paper. The cold pasted glue is very consistant, however, after many hot washing the patch may begin to peel off especially at the corners.
Please select the application type
for sew on
for sew on, with fleece backing
for sew on, with fleece backing and overlock stitching
Split labels: up to 6 variants at the same price [ info ]
Note: For quantities above 100,000 pieces please contact us. We will then submit an indiviual offer.
Please select the number of colors including background first.
colors in total (incl. background)
...and then click here to enter the single colors
How do you want to proceed?
I want to upload my own file
I create the design online now (for rectangular shapes only)
Please enter remarks, possible descriptions of variants, instructions for the production or other important facts here.
|Patch name: not yet entered|
|1.000 patches (per pc.: 0,09 )|
|Express (~ 10 instead of 20 d.)
not selected » select
Order woven samples only [ info ]
Order woven samples only
If you activate this option, we will produce woven samples of your label only and send them physically instead of as a digital photo. You will receive 2-4 unfolded and uncut samples on a tape to assure yourself of the weaving quality. The weaving matrix mentioned above will be archieved and will not have to be paid again at a possible order. Using the access data you will get after the order, you can order the final quantity with a few clicks. Lead time for the woven samples: approx. 4-7 working days.
Woven patches are the much better choice than e.g. embroidered ones. They offer a considerably higher level of details and a lower price per piece. All shapes, backings and edgings (also overlock stitching) can be produced.
In any shape - upload a file or design them online
Normal: approx. 20 days, Express: approx. 10 days